How To Test Dryer Control Board
How To Test Dryer Control Board. The problem is likely caused by the motor or the motor relay on the control board. Have you checked the plug?
This component monitors the moisture levels within the dryer and adjusts the dry time during the automatic drying cycle. Have you checked the plug? Test the plug to ensure that it is secure in the outlet.
Just Reinstall Your Board, And You’re Back In Business!
A few other parts that can often prevent a dryer from working properly include: Pull the wire harness plug from the connection receptacle on the electronic control board. It is possible to determine if the control board is an issue by entering the whirlpool duet dryer diagnostics.
Unplug Dishwasher Or Disconnect Power.
Indicates one or more key switch lines are stuck or shorted on either the control or the keypad. To determine if the control or keypad is faulty, do the following test: How can i test or check the electronic boards for defects?
Unplug Or Turn The Breaker Off To Your Dryer First.
I tested the startup winding motor: Check out the deal on hybrid opl control board pkg. This part is a moisture sensor control board that is used on dryer units.
Remove The Main Control Board, We Recommend Taking A Photo Of The Wiring Connections To Ensure You Can Properly Reconnect Them.
This board can also be in kenmore and maytag dryers. This is a new main control board replacement part for dryers, whirlpool dryer electronic control board wpw10111606. I have a maytag dryer mde6700ayw.
Set The Electronic Control Board Aside For Disposal.
If the thermal fuse or belt switch was broken then the dryer motor would not run at all even for a few minutes. Here is what i have done. One way to narrow down the search for the problem is through process of elimination.
Post a Comment for "How To Test Dryer Control Board"