How To Troubleshoot Ge Refrigerator Control Board
How To Troubleshoot Ge Refrigerator Control Board. It is a 110 ohm resistor right at top of the board next to the 47 mfd capacitors on top. I am trying to troubleshoot the motherboard in my ge profile arctica stainless steel side by side refrigerator.
Turn on the water on the refrigerator at the shut off valve. Although the cover has a foam seal, if this seal is bad and the water line leaks from above this could allow water to get into the board location. If the control board continues to be faulty or not work at all, then it could be that the ge monogram refrigerator control lock was put in place by accident.
Turn Off The Electricity Supplier Board And Unplug The Refrigerator.
It helps to have a bright light on the old board to aid sorting out the details. Now you can replace the filter of the refrigerator. General electric bottom mount refrigerator pgcs1rkzass my repair & advice replaced the main control board, which was easy to access.
After 30 Seconds You Can Change The Filter Of The Refrigerator.
Locate the lock button and hold it in for three seconds. If you have evidence of this you should seal the cover after screwing it in place with duct tape or metal foil tape to protect it. It is a 110 ohm resistor right at top of the board next to the 47 mfd capacitors on top.
The Only Way To Troubleshoot This Problem Is By Opening Up The Freezer And Checking The Temperature Of The Coils.
Model ge french door my repair & advice. Although the cover has a foam seal, if this seal is bad and the water line leaks from above this could allow water to get into the board location. The circuit breaker is off for 30 seconds the control board.
Next, Pull Out The Bottom Of The Control Panel From The Dispenser.
Ge fridge freezer doesn’t work: How to fix ge refrigerator led lights not working! The condenser fan, the compressor (an overheated compressor shuts off, making a clicking sound), or the control board (if the clicking sound is coming from the rear of your refrigerator, you should have the entire board replaced by a professional).
Removing The Wiring Harness Requires Learning Where To Squeeze Them To Unlock The Plugs.
Inserting a thermometer into the coil is one way to do this. Replaced the main control module. All the electrical connectors were different sizes so that there was no ambiguity as to what plug went where once the board was seated.
Post a Comment for "How To Troubleshoot Ge Refrigerator Control Board"